| Range of product |
Altistart 48 |
| Product or component type |
Soft starter |
| Product destination |
Asynchronous motors |
| Product specific application |
Heavy duty industry and pumps |
| Device short name |
ATS48 |
| utilisation category |
AC-53A |
| Ue power supply voltage |
230...415 V - 15...10 % |
| power supply frequency |
50...60 Hz - 5...5 % |
| Motor power kW |
75 kW at 230 V connection to the motor delta terminals for severe applications
75 kW at 400 V connection in the motor supply line for severe applications
90 kW at 230 V connection to the motor delta terminals for standard applications
90 kW at 400 V connection in the motor supply line for standard applications
110 kW at 400 V connection to the motor delta terminals for severe applications
132 kW at 400 V connection to the motor delta terminals for standard applications
37 kW at 230 V connection in the motor supply line for severe applications
45 kW at 230 V connection in the motor supply line for standard applications |
| Device connection |
To the motor delta terminals
In the motor supply line |
| Protection type |
Phase failure: line
Thermal protection: motor
Thermal protection: starter |
| Standards |
EN/IEC 60947-4-2 |
| Product certifications |
C-Tick
NOM 117
CCC
GOST
TCF
DNV
SEPRO
CSA
UL |
| marking |
CE |
| Discrete input number |
5 |
| Discrete input type |
PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm |
| Discrete input logic |
Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
|
| Minimum switching current |
10 mA at 6 V DC for relay outputs |
| Discrete output number |
2 |
| Discrete output type |
(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO |
| Analogue output type |
Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm |
| Communication port protocol |
Modbus |
| Connector type |
1 RJ45 |
| Communication data link |
Serial |
| Physical interface |
RS485 multidrop |
| Transmission rate |
4800, 9600 or 19200 bps |
| Function available |
External bypass (optional) |
| Operating position |
Vertical +/- 10 degree |
| Height |
340 mm |
| Width |
200 mm |
| Depth |
265 mm |
| Net weight |
12.4 kg |
| Electromagnetic compatibility |
Conducted and radiated emissions level A conforming to IEC 60947-4-2
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Relative humidity |
0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Ambient air temperature for operation |
40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating) |
| Ambient air temperature for storage |
-25…70 °C |
| Operating altitude |
<= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m |
| Unit Type of Package 1 |
PCE |
| Number of Units in Package 1 |
1 |
| Package 1 Height |
43 cm |
| Package 1 Width |
33 cm |
| Package 1 Length |
46 cm |
| Package 1 Weight |
13.816 kg |
| Unit Type of Package 2 |
P06 |
| Number of Units in Package 2 |
2 |
| Package 2 Height |
73.5 cm |
| Package 2 Width |
80 cm |
| Package 2 Length |
60 cm |
| Package 2 Weight |
40 kg |
| Warranty |
18 months |
