TC4L-24R bộ điều khiển nhiệt độ

Chi tiết sản phẩm TC4L-24R

Mã sản phẩm: TC4L-24R

Loại cài đặt: Thiết lập bằng công tắc cảm ứng

Chữ số: 9999 (4digit)

Kích thước: 96x96

Đầu ra phụ: Alarm1 Alarm2

Nguồn cấp: 100-240VAC

Đầu ra điều khiển: relay + SSR

Hướng dẫn chọn mã

TC3YF-Huong-dan-chon-ma

TC4-Huong-dan-chon-ma

TCN-Huong-dan-chon-ma

Thông số kỹ thuật

Power supply	AC power	100-240VACᜠ 50/60Hz
	AC/DC Power	24VACᜠ 50/60Hz, 24-48VDCᜡ
Allowable voltage range		90 to 110% of rated voltage
Power consumption	AC power	Max. 5VA (100-240VAC 50/60Hz)
	AC/DC Power	Max. 5VA (24VAC 50/60Hz), Max. 3W (24-48VDC)
Display method		7Segment (Red), Other display (Green, Yellow, Red LED)
Input type	RTD	DPt100Ω, Cu50Ω (Allowable line resistance max.5Ω per a wire)
	TC	K (CA), J (IC), L (IC)
Display accuracy	RTD	At room temperature (23℃±5℃): (PV ±0.5% or ±1℃, select the higher one) ±1digit Out of room temperature range: (PV ±0.5% or ±2℃, select the higher one) ±1digit
	TC
Control output	Relay	250VACᜠ 3A 1a
	SSR	12VDCᜡ ± 2V 20mA Max
Alarm output		AL1, AL2 Relay: 250VACᜠ 1A 1a (※TC4SP, TC4Y have AL1 only.)
Control method		ON/OFF and P, PI, PD, PID control
Hysteresis		1 to100℃/℉ (0.1 to 50.0℃/℉) variable
Proportional band (P)		0.1 to 999.9℃/℉
Integral time (I)		0 to 9999 sec.
Derivative time (D)		0 to 9999 sec
Control period (T)		0.5 to 120.0 sec.
Manual reset		0.0 to 100.0%
Sampling period		100ms
Dielectric strength	AC power	2,000VAC 50/60Hz for 1min. (between input terminal and power terminal)
	AC/DC Power	1,000VAC 50/60Hz for 1min. (between input terminal and power terminal)
Vibration		0.75mm amplitude at frequency of 5 to 55Hz in each X, Y, Z direction for 2 hours
Relay life cycle	Mechanical	OUT: Min. 5,000,000 operations, AL1/2: Min. 5,000,000 operations
	Electrical	OUT: Min. 200,000 operations (250VAC 3A resistive load), AL1/2: Min. 300,000 operations (250VAC 1A resistive load)
Insulation resistance		Min. 100MΩ (at 500VDC megger)
Noise immunity		Square-wave noise by noise simulator (pulse width 1㎲) ± 2KV R-phase and S-phase
Memory retention		Approx. 10 years (When using non-volatile semiconductor memory type)
Environ -ment	Ambient temp	10 to 50℃, Storage: -20 to 60℃
	Ambient humi.	35 to 85%RH, Storage: 35 to 85%RH
Insulation type		Double insulation or reinforced insulation (mark: , Dielectric strength between the measuring input part and the power part: AC power 2kV, AC/DC Power 1kV)

Ứng dụng

Bộ điều khiền nhiệt độ được ứng dụng rộng rải trong các dây chuyền chế biến thực phẩm, đùn nhựa, hệ thống nhà kính, xử lý rác thải, đóng gói sản phẩm,...