| Classification |
Indicator |
Single preset output type |
Dual preset output type |
|
Measuremen
|
DC, AC voltage |
M4Y-DVM4Y-AV - M5W-DVM5W-AV |
M4W-DVM4W-AV - M4M-DVM4M-AV - |
M4W1P-DVM4W1P-AV - M4M1P-DVM4M1P AV - |
M4W2P-DVM4W2P-AV - M4M2P-DVM4M2P-AV - |
| DC, AC current |
M4Y-DAM4Y-AA - M5W-DAM5W-AA - |
M4W-DAM4W-AA - M4M-DAM4M-AA - |
M4W1P-DAM4W1P-AA - M4M1P-DAM4M1P-AA - |
M4W2P-DAM4W2P-AA - M4M2P-DAM4M2P-AA - |
| AC power (0-10VDC) |
M4Y-W- ☐ M5W-W- ☐ |
M4W-W- ☐ M4M-W- ☐ |
M4W1P-WM4M1P-W |
M4W2P-W M4M2P-W |
| rpm, speed (0-10VDC) (0-10VAC) |
M4Y-T ☐- ☐ M4Y-S ☐- ☐ M5W-T- ☐ M5W-S- ☐ |
M4W-T ☐- ☐ M4W-S ☐- ☐ M4M-T- ☐ M4M-S- ☐ |
M4W1P-T - M4W1P-S - M4M1P-TM4M1P-S |
M4W2P-T - M4W2P-S - M4M2P-TM4M2P-S |
| Power factor (DC4-20mA) |
- |
M4W-P (Refer to L-57) |
- |
- |
| Max. allowable input |
150% for each input specification (At 400VAC:120%) |
|
Power supply
|
AC power |
100-240VAC 50/60Hz |
110/220VAC 50/60Hz, 100-240VAC 50/60Hz |
| DC power |
5VDC(Except for M5W) 24-70VDC |
24-70VDC |
| Allowable voltage rang |
90 to 110% of rated voltage |
|
Power consumption
|
AC power |
4VA |
5VA |
| DC power |
2W |
3W |
| Display method |
7Segment LED Display(Character height: 10mm) |
| Sampling cycle |
300ms |
| A/D conversion method |
Dual slope intergal method |
| Response time |
2sec(0 to 1999) |
| Sampling times |
2.5 times/sec |
| Insulation resistance |
Over 100MΩ(at 500VDC megger) |
| Dielectric strength |
2000VAC 50/60Hz for 1 minute |
| Noise immunity |
±1kV the square wave noise(pulse width:1㎲) by the noise simulator |
|
Vibration
|
Mechanical |
0.75mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 1 hour |
| Malfunction |
0.5mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 10 minutes |
|
Shock
|
Mechanical |
300m/s²(approx. 30G) in each X, Y, Z direction for 3 times |
| Malfunction |
100m/s²(approx. 10G) in each X, Y, Z direction for 3 times |
|
Environment
|
Ambient temperature |
-10 to 50℃, storage: -25 to 65℃ |
| Ambient humidity 3 |
35 to 85%RH, storage: 35 to 85%RH |
| Output capacity |
M4M: Non, M4M1P: 250VAC 3A 1c, M4M2P: 250VAC 3A 1c×2 |
|
Relay life cycle
|
Mechanical |
- |
Min. 10,000,000 operations |
| Electrical |
- |
Min. 100,000 operations (250VAC 3A resistive load) |
| Display accuracy |
DC: F.S. ±0.2% rdg ±1Digit 23℃ ±5℃, AC: F.S. ±0.5% rdg ±1Digit 23℃ ±5℃ |
| Unit weight |
M4Y: Approx. 144g M5W: Approx. 172g |
M4W: Approx. 168g M4M: Approx. 262g (M4M-P: Approx. 268g) |
M4W1P: Approx. 253g M4M1P: Approx. 290g |
M4W2P: Approx. 278g M4M2P: Approx. 316g |
