JavaScript có thể đã bị vô hiệu hóa trên trình duyệt của Quý khách. Để trải nghiệm tốt nhất trên site, hãy bật Javascript trên trình duyệt của Quý khách.

NVF2G-S-3.7/TS4 Biến tần 3.7kW Chint

SKU
NVF2G-S-3.7/TS4
Còn hàng
11.390.500 ₫
-
+
Tổng Quan

Thông số kỹ thuật sản phẩm

- Mã sản phẩm: NVF2G-S-3.7/TS4

- Dòng sản phẩm: Biến tần

- Series: NVF

- Hãng sản xuất: Chint

- Xuất cứ: Trung Quốc

- Công suất: 3.7  kW

- Loại: Loại tổng hợp

- Điện áp nguồn vào: 3 pha

- Điện áp đầu vào: 380V

Thư mục: Biến tần  

Chi tiết sản phẩm

- Mã sản phẩm: NVF2G-S-3.7/TS4

- Dòng sản phẩm: Biến tần

- Series: NVF

- Hãng sản xuất: Chint

- Xuất cứ: Trung Quốc

- Công suất: 3.7  kW

- Loại: Loại tổng hợp

- Điện áp nguồn vào: 3 pha

- Điện áp đầu vào: 380V

Hướng dẫn chọn mã

NVF2G-NVF300M-NVF5-Huong-dan-chon-ma

Thông số kỹ thuật

NVF2G Series

Input and output features Input voltage range: 380V/220V(±15%)
Input frequency range: (47-63)Hz
Output voltage range: 0- rated input voltage
Output frequency range: General type: (0-400)Hz; Fan and water pump type: (0-120)Hz
Peripheral interface Programmable digital input: Mini type: 5-route; General type, fan and water pump type: 6-route
Programmable analog quantity input: AI1: (0-10)V input; AI2: (0-10)V or (0/4-20)mA; AI1 + AI2
Open collector output: 1-route output
Relay output: Mini type: 1-route output; General type, fan and water pump type: 2-route output
Analogue output: For 2-route output, (0-10)V or (0/4-20)mA (mini type; 1-route) can be selected
Operation functions and features Torque boost: Automatic torque boost; Manual torque boost of 0.1% - 30.0%
Dynamic braking: Built-in or external brake unit, external connection with brake resistance
DC braking: Start and stop are selectable separately; motion frequency (0-10)Hz, brake current (0-150)% , actuation time (0.0-50.0)s
Jog control: Jog frequencyrange: (0-400)Hz, time for jog acceleration and deceleration (0.1-3600.0)s
Multistage speed operation: Multistage speed operation can be achieved through the built-in simple PLC or controlling multi-function terminal.
Automatic voltage regulation (AVR): When the network voltage changes, it can keep the output voltage stable automatically
Automatic current limit: To automatically limit the current during the operation to prevent fault and tripping due to frequent overcurrent
Built-in PID controller: It can constitute a closed-loop control system conveniently
Self-defined JOG function key: The JOG key can be set as jog operation or switch from forward and reverse operation
Protection functions: It can provide over 20 kinds of fault protection functions: overcurrent, overvoltage, undervoltage overheating, default phase, overload, PID disconnection and other protection functions,
Technical features Control mode: Non-PG vector control, V/F control, torque control
Overload capacity: Mini type and general type: 150% rated current for 1min; Fan and pump type: 120% rated current for 1 min
Starting torque: Non-PG vector control: 0.5 Hz /150% (Rated torque)
Speed regulation ratio: Non-PG vector control: 1: 100; V/F control: 1:50
Speed control precision: (non-PG vector control): ±0.5% maximum speed
Carrier frequency (1-15) kHz
Operation environment Temperature: The inverter should be used at an ambient temperature of -10℃ to +40℃ and derated by 1% per 1℃ when it is over 40℃
Humidity: Relative air humidity of the operation environment ≤ 90%, without moisture condensation
Altitude: The inverter can achieve the rated power when installed below the altitude of 1000m. It should be derated by 10% per 1000m when over 1000m
Shock and vibration: The inverter should not be dropped to the ground or subjected to sudden shock. It should not be installed in places where vibration may occur.
Electromagnetic radiation: The inverter should not be installed adjacent to electromagnetic radiation protection
Air pollution: The inverter should not be installed in places with air pollution, such as dust or corrosive gas atmosphere
Structure Protection degree: IP20
Brake units Standard braking unit for model under 22 kw; standard braking unit for model equal to or above 22 kW
Cooling mode: High-speed DC fan is used for the cooling of the whole NVF2G series inverter

NFM300M Series

NVF300M-Thong-so-ky-thuat

NVF5 Series

NVF5-Thong-so-ky-thuat

Ứng dụng

- Hệ thống quạt thông gió

- Hệ thống bơm cấp nước

- Dây chuyền sản suất

- Dây chuyền đóng gói

- Dây chuyền sản suất thực phẩm

- Hệ thống băng chuyền

Thông số sản phẩm
Ứng dụng N/A
Dòng series N/A
Điện áp N/A
Thời gian bảo hành N/A
Xuất xứ N/A