THD-WD2-T Bộ điều khiển nhiệt độ

Chi tiết THD-WD2-T Bộ điều khiển nhiệt độ - độ ẩm

Mã sản phẩm: THD-WD2-T

Dòng sản phẩm: temperature sensors

Mô tả: Bộ điều khiển nhiệt độ - độ ẩm

Series: THD-W

Categories: Đồng hồ nhiệt độ

Hãng: Autonics

Gắn: Tường

Hiển thị: Có

Chiều dài cực cảm biến:200mm

Đầu ra: Đầu ra truyền thông RS485 Modbus RTU

THD-Huong-dan-chon-ma

Model		THD-R-PT	THD-R-PT/C	THD-R-C THD-R-V THD-R-T	THD-D THD-W	THD-DD THD-WD
Power supply		-	24VDC
Allowable voltage range		90 to 110% of rated voltage
Power consumption		-	Max. 2.4W
Measuring input		Temperature (Built-in sensor)	Temperature, Humidity(Built-in sensor)
Display type		Non-indicating type				7Segment LED display
Display digit		-				Each 3digits for temp./humidity
Character size		-				W6.2×H10.0mm
Measurement range	Temp	-19.9 to 60.0℃
	Humidity	-	0.0 to 99.9%RH(THD-R is required to attend for using over 90%RH.)
Accuracy	Temp.	Max. ±0.8℃	1.0℃ (at room temperature)
	Humidity	-	±3%RH (30 to 70%RH, at room temp.), ±4%RH (10 to 90%RH)		±2%RH (10 to 90%RH, at room temp.)
Output	Temp.	DPt100Ω resistance value		DC4-20mA, 1-5VDC DPt100Ω resistance value
	Humidity	-	DC4-20㎃
Sampling cycle		-	Fixed in 0.5 sec
Insulation resistance		-	Min. 100MΩ(at 500VDC megger)
Dielectric strength		-	500VAC 50/60Hz for 1 minute
Noise resistance		-	±0.3kV the square wave noise(pulse width:1㎲) by the noise simulator
Vibration	Mechanical	-	0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1hour
	Malfunction	-	0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10min.
Shock	Mechanical	-	300m/s²(approx. 30G) in each of X, Y, Z directions for 3 times
	Malfunction	-	100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times
Protection		IP10			IP65(except sensing part)
Ambient temperature		20 to 60℃, storage: -20 to 60℃
Cable		Terminal type			Ø4mm, 4-wire, Length: 2m
Unit weight		Approx. 55g			Approx. 160g