Range of product |
Altistart 22 |
Product or component type |
Soft starter |
Product destination |
Asynchronous motors |
Product specific application |
Pumps and fans |
Component name |
ATS22 |
Network number of phases |
3 phases |
[Us] rated supply voltage |
230...440 V - 15...10 % |
Motor power kW |
110 kW 230 V 220 kW 400 V 220 kW 440 V |
Factory setting current |
388 A |
Power dissipation in W |
177 W for standard applications |
utilisation category |
AC-53A |
type of start |
Start with torque control (current limited to 3.5 In) |
IcL starter rating |
410 A for connection in the motor supply line for standard applications |
IP degree of protection |
IP00 |
Assembly style |
With heat sink |
Function available |
Internal bypass |
Supply voltage limits |
195…484 V |
Supply frequency |
50...60 Hz - 10...10 % |
Network frequency |
45...66 Hz |
Device connection |
To the motor delta terminals In the motor supply line |
[Uc] control circuit voltage |
230 V - 15...10 % 50/60 Hz |
Control circuit consumption |
20 W |
Discrete output number |
2 |
Discrete output type |
Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O |
Minimum switching current |
100 mA at 12 V DC (relay outputs) |
Maximum switching current |
5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs |
Discrete input number |
3 |
Discrete input type |
(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm |
Discrete input voltage |
24 V <= 30 V |
Discrete input logic |
Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA |
Output current |
0.4...1 Icl adjustable |
PTC probe input |
750 Ohm |
Communication port protocol |
Modbus |
Connector type |
1 RJ45 |
Communication data link |
Serial |
Physical interface |
RS485 multidrop |
Transmission rate |
4800, 9600 or 19200 bps |
Installed device |
31 |
Protection type |
Phase failure: line Thermal protection: motor Thermal protection: starter |
marking |
CE |
Type of cooling |
Forced convection |
Operating position |
Vertical +/- 10 degree |
Height |
425 mm |
Width |
206 mm |
Depth |
299 mm |
Net weight |
33 kg |
Motor power range AC-3 |
110…220 kW at 380…440 V 3 phases 110…220 kW at 200…240 V 3 phases |
Motor starter type |
Soft starter |
Electromagnetic compatibility |
Conducted and radiated emissions level A conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
Standards |
EN/IEC 60947-4-2 |
Product certifications |
GOST CCC CSA UL C-Tick |
Vibration resistance |
1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6 1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6 |
Shock resistance |
15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
noise level |
56 dB |
Pollution degree |
Level 2 conforming to IEC 60664-1 |
Relative humidity |
0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
Ambient air temperature for operation |
-10…40 °C (without derating) 40…60 °C (with current derating 2.2 % per °C) |
Ambient air temperature for storage |
-25…70 °C |
Operating altitude |
<= 1000 m without derating > 1000...< 2000 m with current derating of 2.2 % per additional 100 m |
Unit Type of Package 1 |
PCE |
Number of Units in Package 1 |
1 |
Package 1 Height |
49.0 cm |
Package 1 Width |
37.0 cm |
Package 1 Length |
54.5 cm |
Package 1 Weight |
26.8 kg |
Unit Type of Package 2 |
PAL |
Number of Units in Package 2 |
1 |
Package 2 Height |
49.0 cm |
Package 2 Width |
37.0 cm |
Package 2 Length |
54.5 cm |
Package 2 Weight |
26.8 kg |
Warranty |
18 months |