ATS48D75Q khởi động mềm Schneider

SKU
ATS48D75Q
Còn hàng
18.635.320 ₫
-
+
Tổng Quan

Thông số kỹ thuật ATS48D75Q

Bộ khởi động mềm ATS48D75Q 75A 400V

GIÁ ĐÃ BAO GỒM VAT

Dòng sản phẩm : Khởi động mềm

Công suất : 37 kW 400 V

Mức độ bảo vệ : IP00

Thư mục: Khởi động mềm  

Chi tiết sản phẩm ATS48D75Q

Bộ khởi động mềm ATS48D75Q

Dòng sản phẩm : Khởi động mềm

Công suất : 37 kW 400 V

Mức độ bảo vệ : IP00

Range of product Altistart 48
Product or component type Soft starter
Product destination Asynchronous motors
Product specific application Heavy duty industry and pumps
Device short name ATS48
utilisation category AC-53A
Ue power supply voltage 230...415 V - 15...10 %
power supply frequency 50...60 Hz - 5...5 %
Motor power kW 55 kW at 400 V connection to the motor delta terminals for standard applications
55 kW at 400 V connection to the motor delta terminals for severe applications
15 kW at 230 V connection in the motor supply line for severe applications
18.5 kW at 230 V connection in the motor supply line for standard applications
30 kW at 230 V connection to the motor delta terminals for severe applications
30 kW at 400 V connection in the motor supply line for severe applications
37 kW at 230 V connection to the motor delta terminals for standard applications
37 kW at 400 V connection in the motor supply line for standard applications
Device connection To the motor delta terminals
In the motor supply line
Protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter
Standards EN/IEC 60947-4-2
Product certifications DNV
GOST
UL
NOM 117
CCC
CSA
C-Tick
TCF
SEPRO
marking CE
Discrete input number 5
Discrete input type PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
Discrete input logic
Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Minimum switching current 10 mA at 6 V DC for relay outputs
Discrete output number 2
Discrete output type (LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Analogue output type Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
Communication port protocol Modbus
Connector type 1 RJ45
Communication data link Serial
Physical interface RS485 multidrop
Transmission rate 4800, 9600 or 19200 bps
Function available External bypass (optional)
Operating position Vertical +/- 10 degree
Height 290 mm
Width 190 mm
Depth 235 mm
Net weight 8.3 kg
Electromagnetic compatibility Conducted and radiated emissions level A conforming to IEC 60947-4-2
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
Relative humidity 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
Ambient air temperature for operation 40…60 °C (with current derating of 2 % per °C)
-10…40 °C (without derating)
Ambient air temperature for storage -25…70 °C
Operating altitude <= 1000 m without derating
> 1000...2000 m with current derating of 2.2 % per additional 100 m
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 36 cm
Package 1 Width 30.5 cm
Package 1 Length 39 cm
Package 1 Weight 10.266 kg
Unit Type of Package 2 P06
Number of Units in Package 2 2
Package 2 Height 73.5 cm
Package 2 Width 80 cm
Package 2 Length 60 cm
Package 2 Weight 33.532 kg
Warranty 18 months
Thông số sản phẩm
Ứng dụng N/A
Dòng series N/A
Xuất xứ N/A
Điện áp N/A

Bảo hành 18 tháng