Điện áp 220V
Xuất xứ Indonesia
Hãng sản xuất Hanyoung
Chi tiết sản phẩm TPR3N-220-50A
- Chức năng: Bộ điều chỉnh nguồn Thyristor
- Mã sản phẩm: TPR3N-220-50A
- Hãng: Hanyoung
- Dòng tải: 50A
- Số Pha: 3 pha
- Điện áp 220V
Specification
| Model |
TPR-3N |
| function |
LED display function, input signal selection, operation mode selection (resistive load, inductive load) |
| Overcurrent alarm output (O.C), power phase loss and fuse break alarm output, load break alarm (L.L), alarm output |
| LED overheat (OT) (thermostat fixed at 85 ℃) |
| Constant |
Three phase |
| Rated Current |
70 A, 100 A |
| Control method |
Phase control, ON / OFF control, Cycle control |
| Applied load |
Resistive load, inductive load |
| Power supply voltage |
220, 380, 440 Va.c, 50/60 ㎐(universial) |
| Output voltage range |
95% or more of input voltage (minimum load current 0.5 A or more) |
| Input signal |
4 - 20 ㎃ d.c, 0 - 5, 1 - 5, 0 - 10 V d.c Contact input, manual setting |
| Output setting range |
Tilt Setting: 50% (when inductive load is selected), Output Limit: 0 to 100%
Manual setting: 0 to 100% (External B 10 kΩ volume / parameter setting) |
| Starting method |
SOFT START / SOFT UP / DOWN |
| Alarm output |
Overcurrent alarm (O.C), power phase failure and fuse break alarm, load break (L.L) alarm
Heat sink overheat alarm (Setting range: TPRF-3N 0 to 100 ℃) |
| Relay contact output (1a contact), 250 Va.c, 10 A max (Resistance load) |
| Insulation Resistance |
Min. 100 ㏁ (500 V d.c Mega standard) |
| Dielectric Strength |
For 1 minute at 2000 V |
| Weight |
Approx. 5 kg |
Thông số kỹ thuật môi trường
| Cooling system |
Forced cooling by fan (FAN) |
| Ambient temperature |
0 ~ 50 °C |
| Ambient humidity |
30 ~ 85 % RH (However, there should be no condensation phenomenon) |
| Storage temperature |
-25 ~ 70 °C |
Hướng dẫn chọn mã
Sơ đồ đấu dây
Tên từng bộ phận
